PANELS: 10gauge steel wire crimped and woven in to1" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts. DOORS: Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly. POSTS: Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels. HARDWARE: Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided. Average height 10' tall - two doors 8' Tall Multiple configurations - Over 50' of panels varying in heights and widths 11 side posts - 4 corner posts and 2 door posts. Ship from Stock - Plymouth MN - Come down and take a look!

$ 4.00 ea 4” x 2” solid hard rubber wheel 4 x 4 ½” top plate - bolt hole spacing – slotted to 3” x 3” Plain bearing - Approx 400 lbs per caster 5 5/8” overall height

$ 98.00 ea (4) Rigid and (2) Swivel Available 12” x 3” dia wheel - Duralast wheel material 3,500 lb capacity 15.5” overall height Top plate size - 5 ¼” x 7 ¼” slotted mounting plates bolt hole size ½”