PANELS: 10gauge steel wire crimped and woven in to1" x 1" opening rectangular mesh, securely welded into a frame of 1-1/4" x 1-1/4" x 1/8" steel angle factory punched with 7/8" x 7/16" slotted holes to accept 3/8" mounting hardware. Panels four to six feet wide shall have one 1/4" x 3/4" flat stiffener, wider panels receive two 1/4" x 3/4" stiffeners. All panels shall be fastened to posts with 3/8" x 3" plated bolts and nuts. DOORS: Hinged shall be constructed of the same materials as the panels with two 1/4" x 3/4" horizontal stiffeners across the width, and two diagonal 1/4" x 3/4" stiffeners from center to the corner. Hinged doors shall be equipped with padlock lugs (cylinder lock optional), three 4" x 4" spun pin hinges, and pick plate/slam bar assembly. POSTS: Shall be made of 2" x 2" x 14 gauge steel tubing. Base plates of 2" x 7" x 1/4" steel flat with two 7/16" round holes for anchoring, shall be welded to each tube. Posts are factory drilled with 1/2" holes to accept hardware for mounting panels. HARDWARE: Shall be 3/8" standard thread grade two plated nuts and bolts. Floor anchors are 3/8" wedge type-provided. Average height 10' tall - two doors 8' Tall Multiple configurations - Over 50' of panels varying in heights and widths 11 side posts - 4 corner posts and 2 door posts. Ship from Stock - Plymouth MN - Come down and take a look!

Manufactured from tough rubber and nylon. Can withstand ANY weather Condition. These are drilled to accept 3/4" anchor bolts. ( not included) 18"W x 18"L x 4"H L-shaped Bumper 12 available to ship from stock in Plymouth MN, to MN, ND, SD, and WI within days.

3 Steel Bollards Available - 48"H x 7" dia 12" x 12" foot plate size - 9.5" x 9.5" bolt hole spacing. These can be used both indoors and outdoord to protect work areas, racking and Personal Ship from Stock to MN, ND, SD, WI